The old “3” coating has been replaced by the new “TCI” level. “3” can be provided according to requirements, but usually there will be 1-2 weeks of delivery time.
The old “7” coating has been replaced by the new “GLH” level. “7” can be provided according to requirements, but usually there will be 1-2 weeks of delivery time.
Dmk30-glh is a good first choice for most applications. Additional coatings may be provided on request.
CHNC-Pressed helical tube insertion
DPA’s rhine-carb high performance insertion is designed for extremely aggressive metal cutting and long tool life.
Stronger cutting edges for heavier chips, greater impact absorption and longer tool life
A top rake for reducing cutting force and reducing torque
Thicker liners to enhance strength and heat absorption capacity
The new PHCD – insert hole is a soft non-ferrous material used to grind graphite and aluminum (not used in steel or steel). When you grind these materials, choose the PHCD – tilt bulb socket, and you can improve your tool life by 50 to 100 times better than coated carbide!
Excellent wear resistance
Accurately provides precise cutting radius
Suitable for standard DPA bulb
Optimized performance in all bulb applications:
Smooth cutting action
Cut the chatter
Cleaner surface finish
Reduce stress on working materials
Reduces the pressure and heat of the tool
Longer tool life
HFBD series – high feed insertion
High feed insertion of HFBD
Final roughening of small diameter applications:
3/8 of the diameter
For lumen/core roughing, pocket, detail area roughing and screw interpolation
BNEM cutting must be used (not suitable for BDEM tool)
90 ° insert/APKT – Style inserted into the square shoulder
The DPA is a square shoulders in insert apkt style, it is provided for the combination of economic and performance, in pressing, grinding and molding version, in a different corner radius of a large number of insert.
