7. Work. The priority of the handle of the handle should be 16-32 microto prevent slip.
Eight items. Cutting tools should not be at the bottom of our bracket; Damage may result in tools and/or stents. Suggest doing so. After installing the tool, the cutter holder has a shrinkage of 015 inches.
9. We strongly recommend that only hard alloy tools are either less or less than the diameter of the cutter. 375 inches. For the steel body of this size, disassembly is very difficult.
These items are a recommended contractive fit toolkit that allows you to perform various processing operations at your new CHNC factory.
Special and custom tooling requirements
If because of the special request can’t be found in our catalog a tool holder, at the time of order, our design team will before making your custom tool support to produce a computer print out, to get your approval.
This ensures that you get the tools you need. Usually, we have the fastest delivery on the printed custom tool. According to BRY’s request, make your special tool request and standard BRY products together.
Because of internal processes including heat treatment, quick turns.
Non-standard features
Measure the length of the
Pilot diameter
The id card
Tapered style
slot
level
Hole (cOOLANT – ThRU – FLANGE)
Error analysis of HGSK holders
Large diameter clamping device
The length of the clamping device
The short length clamping device
Metric size
The tool holder is reduced to 0.0002 after clamping.
BRY Tru eccentric positioning tools on the ground, a validated end milling cutter design innovation, significantly reduced the all use fixed screw or welding fixed screw end face milling cutter, the total indicator reading (TIR). Improve the different cardiac conditions of the tool holder. 0008 “. The bearers of the BRY have an odd sense of boredom. Eccentricity sets the direction of the screw.
