For example, the standard 1 “knife rod diameter is 1.0001”, which stands for the end milling cutter. 9997 “; The diameter of the gap is. 0004. BRY. 0003 “eccentric hole, with fixed screw tightening, clearance is pushed in. “Center”, while “standard holder” maintains. 0004 “clear and clear is pushed. 0004 “eccentricity. Therefore, when a fixed screw is closed on the standard bracket and the tool is rotated 180 degrees, the total beat is. 0008.
The concept of BRY Tru positioning eccentric hole. A special grinding technique reduces the use of all BRY end mills. 0002 “. Is typical among other holders. For each one. In your stent assembly, your tool life can be reduced to 10%. Simple use of BRY eccentricity, saving 60% of tool life.
Advantages include:
- less running means more uniform chip load and less chatter
- fewer passes to the grinds, because it improves the center rotation, saves time and improves the quality of processing
- more than twice the service life of any other end milling cutter, plus half of the replacement cost of the die, because the tool lives longer
Eccentric hole with BRY Tru
Tools, shallow grooves. 0003 eccentrically entering the hole effectively reduces the non-central state of the installation screw and keeps the TIR position. When the tool is rotated and positioned correctly.
An internal grinding technology can reduce the BRY end milling cutter after clamping. Everyone else has reached our new standard. 0002 “regardless of size, the characteristics and tolerance of other tool holders are not affected. All BRY product catalog holders are g wheels, balanced with the bo res feature, improved milling quality and tools and holders
Life without extra cost.
TRU speed
Balanced tool
- the speed of static or dynamic balance reaches 20,000 RPM
In G2.5.
- recommended that all machines exceed 8000 RPM and up to 20,000 RPM.
- concentric. 0002 “shank – to – bore.
- CHNC precision crossing ground to AT3 taper quality.
