The main shaft is designed to be clamped between 4,000 pounds and 8000 pounds.
The new ALLMATIC Titan 125 high voltage vise is versatile, according to ALLMATIC, “nothing is beyond its grasp!” The threaded holes on both sides allow the workpiece to be fixed and precisely aligned to the base to ensure smooth handling. Other benefits of Titan 125 include short installation times, no external power supply, and the ability to change artifacts in seconds.
The principal axis is the integral of the Titan 125
The core of the Titan 125 is a fully enclosed, masterless, high-pressure spindle. The main shaft is equipped with wear-resistant mechanical power intensifier. A torque wrench, which can be adjusted for 6 to 30 Nm, is used to define fixtures, even in an awkward position over the table.
High pressure clamps clamp
Two clamping systems provide many carrying capacity
The key to Titan 125’s versatility lies in its variable jaws and clamping systems.
The precision of the lower jaw on the ground is an integral part of the processing of high quality workpieces. According to the shape and type of workpiece, the following kinds of jaw choices can be selected:
With a tungsten carbide coating, a very wearable (80 HRC) tungsten carbide coating on the fixture surface increases the retention of approximately 80 %. This can be beneficial to high machine processing rate, and it can also reduce the clamping force when dealing with fragile workpieces.
By clicking on the “quick” switching system to pull the workpiece to the supporting surface, it is easy to get the absolute precision by clamping down.
Hard jaws, hardened and ground are designed to extend the clamping side to the “high side”. “They are threaded and can be compared to” step jaws “and” fake white sharks “and equipped with” click quick “to change the system to click support.
