The jaw of the adapter is only mild. MH10 threads are installed on the pedal to fit the false jaw.
The blank of the chin is for a special jaw. The inclined plane can enter the work piece well. They are made by ggg40.
Master chin rotate 360 ° offset the clamping surface and thread support. Their rear is serrated, and they are equipped with a “click quick” change system to click support.
Fixture inserts can be fixed to the grid. The support clamps form the basis of detachable and modular clamping system. Fixed, movable rotations and movable rigid support jaws are available. Different clamps are placed on them, and can be pressed to the grid plate to securely clamp the most widely used geometric shapes.
All the supporting surfaces are ground, so it is suitable for pre-processed workpieces.
The “gripper” universal set provides many options for clamping unprocessed parts. It includes a basic unit with position fitting, a support unit and a clip insert (round). Use the M12 screw to fix it to the bracket.
Because of its modular design, to support the jaw network board as the center function. If the user changes the support unit, the artifact can be inserted at any location. When the clamping force is applied, the clamp is pressed into the material to create a positive closure. Changing the various components of a common set can change the height of the clamp and the height of the workpiece.
Clamp the irregular module with the eye clamp. The “eye claw” is used to replace the circular clip for the clip universal set. Its special new shape reduces (distribution) application clamping force. This is especially beneficial for the sandwich work.
Other threaded clip inserts (not suitable for holding common set) :
The clip is inserted into the tip 3-4.5mm
